Dynamics of drinking water biofilm in flow/non-flow conditions

Drinking water biofilm formation on polyvinyl chloride (PVC), cross-linked polyethylene (PEX), high density polyethylene (HDPE) and polypropylene (PP) was followed in three different reactors operating under stagnant or continuous flow regimes. After one week, a quasi-steady state was achieved where biofilm total cell numbers per unit surface area were not affected by fluctuations in the concentration of suspended cells. Metabolically active cells in biofilms were around 17-35% of the total cells and 6-18% were able to form colony units in R(2)A medium. Microbiological analysis showed that the adhesion material and reactor design did not affect significantly the biofilm growth. However, operating under continuous flow (0.8-1.9 Pa) or stagnant water had a significant effect on biofilm formation: in stagnant waters, biofilm grew to a less extent. By applying mass balances and an asymptotic biofilm formation model to data from biofilms grown on PVC and HDPE surfaces under turbulent flow, specific growth rates of bacteria in the biofilm were found to be similar for both materials (around 0.15 day(-1)) and much lower than the specific growth rates of suspended bacteria (around 1.8 day(-1)).     

Temperature-Dependent Re-alignment of the Short Multifunctional Peptide BP100 in Membranes Revealed by Solid-State NMR Spectroscopy and Molecular Dynamics Simulations

BP100 is a cationic undecamer peptide with antimicrobial and cell-penetrating activities. The orientation of this amphiphilic α-helix in lipid bilayers was examined under numerous conditions using solid-state ¹⁹F, ¹⁵N and ²H NMR. At high temperatures in saturated phosphatidylcholine lipids, BP100 lies flat on the membrane surface, as expected. Upon lowering the temperature towards the lipid phase transition, the helix is found to flip into an upright transmembrane orientation. In thin bilayers, this inserted state was stable at low peptide concentration, but thicker membranes required higher peptide concentrations. In the presence of lysolipids, the inserted state prevailed even at high temperature. Molecular dynamics simulations suggest that BP100 monomer insertion can be stabilized by snorkeling lysine side chains. These results demonstrate that even a very short helix like BP100 can span (and thereby penetrate through) a cellular membrane under suitable conditions.     

In vitro and in vivo inhibition of Hass avocado polyphenol oxidase enzymatic browning by paeonol, β-cyclodextrin,and paeonol:β-cyclodextrin inclusion complex

1. Download : Download high-res image (257KB)
2. Download : Download full-size image

     

Composite reliability evaluation by sequential Monte Carlosimulation on parallel and distributed processing environments

This paper describes two parallel methodologies for composite reliability evaluation using sequential Monte Carlo simulation. The methodologies are based on coarse grain asynchronous implementations. In the first methodology, a complete simulation year is analyzed on a single processor and the many simulated years necessary for convergence are analyzed in parallel. In the second methodology, the adequacy analysis of the system operating states within the simulated years is performed in parallel and the convergence is checked on one processor at the end of each simulated year. The methodologies are implemented on a 10 nodes IBM RS/6000 SP scalable distributed memory parallel computer and on a network of 8 IBM RS/6000 43P workstations. The results obtained in tests with actual power system models showed high speedup and efficiency on both parallel platforms     

Development and validation of a tool to recall alcoholic beverage and wine consumption over consumers’ lifetimes

Different past experiences are likely to influence current preferences and consumption through learning processes, such as evaluative conditioning, leading to different flavour preference developments. The ability to measure past experience of alcoholic beverage consumption would be useful in order to understand the drivers of current wine consumption. The developed and validated tool provides reliable data for both past alcohol consumption recall and current wine consumption. Intraclass correlation coefficients (ICC) and F-tests indicated reliability, specifically, high internal consistency (lifetime drinking history and current wine consumption), internal validity and acceptable limits of agreement (current wine consumption relative to a 7-day diary), especially for the most frequently consumed wine (red), demonstrating that the measures taken were reproducible over time. In contrast to previous lifetime alcohol consumption studies, the present study included measures of type of wine consumed. Results justify and encourage the administration of the developed tool on a larger sample, aiming to seek associations between ‘drinking histories’ in order to understand current wine consumption.     

Headache in intracerebral hematomas

OBJECTIVES: We sought to describe the frequency and location of headache in intracerebral hematoma (ICH) and to analyze its clinical and CT predictors by means of multivariate analysis. BACKGROUND: Headache is more common in intracerebral hemorrhage than in ischemic stroke, and its frequency varies with hematoma location, but the pathophysiologic mechanisms of headache associated with ICH are not fully known. METHODS: We examined a cohort of 289 patients with ICH during a 14-month period in a university hospital. Clinical, including the presence and location of headache, and CT features were collected by two neurologists. RESULTS: One hundred and sixty-five (57%) patients with ICH had a headache at the onset of their stroke. Headache was more common in cerebellar and lobar hemorrhages than in deep ones (thalamic, caudate, capsuloputaminal, brainstem). Headache was also more common in women, patients younger than 70 years, those who vomited, and those with meningeal signs, a Glasgow Coma Scale score < 10, a hematoma volume > 10 ml or CT evidence of intraventricular or subarachnoid bleeding, moderate to severe hydrocephalus, or transtentorial herniation or midline shift. In multiple logistic regression analysis, only meningeal signs (odds ratio [OR] = 2.3), cerebellar or lobar location (OR = 2.1), transtentorial herniation (OR = 1.8), and female gender (OR = 1.6) were significant predictors of headache at the onset of ICH. CONCLUSIONS: Hematoma location, meningeal signs, and gender are more predictive of headache than hematoma volume, suggesting that headache is more often related to the activation of an anatomically distributed system in susceptible individuals and to subarachnoid bleeding than to intracranial hypertension.     

Hepatic hemangioma. Analysis of 103 cases. Clinical considerations and imaging methods

Hemangiomas are the most common benign vascular tumor found in the liver. In this study, 103 cases of hepatic hemangiomas were analysed in a retrospective manner. Image aspects such as those seen in ultrassonography, computed tomography, nuclear magnetic resonance and arteriography are discussed. The incidence was higher amongst the female sex, between individuals from 40 to 60 years old, which presented predominantly without symptoms (66%) and localized mainly in the right hepatic lobe (74%). The meaning of those aspects, when adopted, permits the clinicians to differentiate benign from malignant nodular lesions in the liver.     

Determination of flexibility factors in curved pipes with end restraints using a semi-analytic formulation

Piping systems are structural sets used in the chemical industry, conventional or nuclear power plants and fluid transport in general-purpose process equipment. They include curved elements built as parts of toroidal thin-walled structures. The mechanical behaviour of such structural assemblies is of leading importance for satisfactory performance and safety standards of the installations. This paper presents a semi-analytic formulation based on Fourier trigonometric series for solving the pure bending problem in curved pipes. A pipe element is considered as a part of a toroidal shell. A displacement formulation pipe element was developed with Fourier series. The solution of this problem is solved from a system of differential equations using mathematical software. To build-up the solution, a simple but efficient deformation model, from a semi-membrane behaviour, was followed here, given the geometry and thin shell assumption. The flexibility factors are compared with the ASME code for some elbow dimensions adopted from ISO 1127. The stress field distribution was also calculated.     

Triethanolamine Stabilization of Methotrexate-β-Cyclodextrin Interactions in Ternary Complexes

The interaction of methotrexate (MTX) with beta-cyclodextrin (β-CD) in the presence of triethanolamine (TEA) was investigated with the aim to elucidate the mechanism whereby self-assembly cyclodextrin systems work in association with this third component. Solubility diagram studies showed synergic increment of the MTX solubility to be about thirty-fold. Experiments using 2D ROESY and molecular modeling studies revealed the inclusion of aromatic ring III of the drug into β-CD cavity, in which TEA contributes by intensifying MTX interaction with β-CD and stabilizes MTX:β-CD:TEA ternary complex by electrostatic interaction. The maintenance of these interactions in solid phase was also studied in ternary MTX:β-CD:TEA and comparisons were made with freeze dried binary MTX:β-CD and physical mixtures. FTIR studies evidenced that MTX–β-CD interaction remained in solid ternary complexes, which was also supported by thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TG)/first derivative of TG analysis (DTG) and C,N,H elementary analysis) and structural (X-ray diffraction analysis, (XRD)) studies, mainly regarding the increment of drug stability. The efficient in vitro drug dissolution studies successfully demonstrated the contribution of ternary complexes, which highlights the importance of this possible new raw material for further applications in drug delivery systems.